The Manker MC11 II (MC11II) released in 2021. It uses Luminus SST40 LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 23200 cd intensity, and a beam distance of 305 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
- Manker MC11 II specifications
- Manker MC11 II pictures
Manker MC11 II (MC11II) specifications
Brand Manker Name MC11 II Type MC11II Rating Launch 2021 Form flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
Weight 83.2 g Length 127.8 mm Body diameter 25.4 mm Head diameter 28 mm Material aluminium alloy with HAIII hard-anodized finish Colors black
System
The emitter of MC11 II manufactured by Luminus, a US-based LED manufacturer. The MC11 II has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
Emitter Luminus SST40 LED Color temperature 5000 K, 6500 K Reflector OP Lens toughtened AR coated glass Switch electronic side, mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
Flux 2000 lm Intensity 23200 cd Throw 305 m CD/LM factor 11.6
Software
The MC11 II has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MC11 II is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
Modes 5 modes Mode memory yes Ramping mode no Strobe yes SOS/Beacon no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The MC11 II cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
Battery 1 x 18650 Li-Ion battery Battery indicator yes Charger port no LVP yes Thermal regulation yes Protection IPx8 Impact resistance 2 m AUX LEDs no Magnetic no
Accessories
It comes with a battery. The battery must be fully charged before you first use your MC11 II. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
Package contents 18650 battery with USB Type-Ccliplanyardspare o-ring
The performance of the Manker MC11 II flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker MC11 II, then don’t hesite and signal the problem to us.
Manker MC11 II (MC11II) pictures
If there’s information about the Manker MC11 II that you would like to see on this site, then write to us.
